- Mon - Sat 8:00 AM - 9:00 PM, Sun: 11:00 AM | 5:00 PM
Grease for use under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds
NLGI Grade 2 – Fluorosilicone-based grease with a base oil viscosity of 495 cSt at 40°C, PTFE-thickened, uses PTFE as a solid lubricants.
NLGI Grade 2-3 – Fluorosilicone-based grease with a base oil viscosity of 9930 cSt at 40°C, PTFEthickened, uses PTFE as solid lubricants.
NLGI Grade 2 – Silicone-based grease with a base oil viscosity of 375 cSt at 40°C, carbon-black thickened, with no solid lubricants.
Grease that can be used in a broad range of temperatures and, in particular, can be used on high-temperature
bearings
Silicone-based material that helps ensure positive lubrication and sealing by slightly swelling rubber O-rings and seals. This product is heat-stable and oxidation-resistant.
High-performance Grease with solid Lubricants for metal/metal combinations involving slow to fast movements,
particularly with medium to high loads
Aerosol: An air cured anti-friction coating filled with molybdenum disulfide and graphite.
A heat-cured antifriction coating filled with molybdenum disulfide and graphite, higher load-carrying capability due to resin selection.
Grease-paste that reduces friction in low-speed, high-load applications by delivering a combination of white solid Lubricants with a mineral oil carrier fluid to the required point of lubrication.
NLGI Grade 2 – lithium complex thickened, uses molybdenum disulfide solid lubricants.
Solid Lubricant paste for the assembly and running-in of metal components
Solid lubricating paste with particularly low friction coefficient for assembly and running-in of metallic components
A mineral-oil-based anti-seize paste formulated with solid lubricants such as copper, molybdenum disulfide, and white solids.
Extremely pure, solid lubricant paste for bolted joints; contains no lead, nickel, sulfur, chlorine or fluorine
Flavours: Vanilla, Coconut, Mojito, Melon, Bubble gum, Black crystal, Apple& Cinnamon, Coffee, Cherry, Lily, Green tea and Lime, Strawberry
Solvent-based (ester) remover for contrast paint in magnetic particle testing.Colorless, fast drying.Suitable for all
metals and ceramics (plastics must be checked in advance)
White contrast paint for magnetic particle inspection.Carrier medium Ketone.Dries quickly.Very good adhesion to all materials.High covering power.Forms a smooth, white film
Black Magnetic Powder Suspension for Magnetic Particle Testing according to EN ISO 9934:1.Carrier medium oil.Average particle size 4.Settlement volume (1h) 0,40 – 0,80 ml / 100ml
Carrier medium oil.Highbrilliance – high fluorescence coefficient, therefore especially suitable for higher area
illumination.Clear, precise indications are especially suitable for rough surfaces.
Pre-cleaner and penetrant remover. Fast drying.Colourless.Suitable for all metals and ceramics (suitability for plastics must be checked before use). The carrier medium,m solvent Ketone mixture left no residues.
Pre-cleaner and penetrant remover, Colourless.Suitable for all metals and ceramics.Suitable for all metals (suitability for plastics needs testing prior to use).Carrier medium alcohol
Water washable penetrant red.Penetrant type 2 according to ASTM E1417.Listed in QPL SAE AMS 2644.Sensitivity class 2 according to AMS 2644. Crack indication colour red. Suitable for all metals.Carrier medium: mineral oil
Molyslip® MSO is a proprietary base, blended with low-gravity, solvent-refined neutral oils and is completely free from cresylic acid, phenols, and cresols, and the alkalinity is controlled at pH7.